Stainless Steel Sink Protector Rack

Stainless Steel Sink Protector Rack is a practical accessory designed for kitchen sinks. It is rectangular in shape and made of stainless steel. The surface has a uniform grid structure. These grids are crisscrossed and woven by fine stainless steel wires to form a flat and elastic plane. On the edge of the protection rack, there are multiple black or gray plastic feet. These feet are evenly distributed around the protection rack to support and fix the protection rack so that it can be placed stably inside the sink.

Features:

1. Sturdy and durable material: Made of stainless steel, it has extremely high strength and hardness, can withstand large weight and pressure, is not easy to deform or damage, ensures stability and integrity during long-term use, and provides reliable protection for the sink.

2. Precise size adaptation: The product size is strictly controlled, and the error range of its length and width is within ±2mm. It can accurately adapt to various standard sizes of kitchen sinks. Whether it is a single or double sink, it can fit tightly with the sink after installation without gaps, ensuring that there will be no shaking or displacement during use, providing all-round care for the sink.

3. Reasonable grid design: The unique grid structure design has uniform grid spacing and moderate size, which can effectively filter impurities such as food residues to prevent them from clogging the drain outlet, and ensure the smooth passage of water. The drainage speed can be increased by 25%, so that the accumulated water in the sink can be quickly discharged, keeping the sink dry and clean, and reducing the generation of odor.

4. Non-slip and stable feet: The equipped plastic feet are made of high-quality non-slip materials, with a friction coefficient of more than 0.3. They can be tightly attached to the bottom of the sink, providing strong grip. Even in the case of water flow impact or object collision, the protective frame will not slide or tilt easily, ensuring the stability and safety of tableware, kitchen utensils and other items placed on it.

5. Fine surface treatment: After electrolytic polishing, the surface presents a bright silver luster with high finish. It is not only beautiful and easy to clean, but also can effectively resist the adhesion of fingerprints and stains. When cleaning, just rinse with water or wipe gently to restore the brightness, reducing the difficulty and time of cleaning, and also helping to extend the service life of the product.

Application:

1. Home kitchen: In the home kitchen, Stainless Steel Sink Protector Rack is an indispensable item. When people wash vegetables, fruits, tableware and other items in the sink, placing it at the bottom of the sink can effectively prevent the sink surface from direct contact with hard objects, reduce scratches and wear, and protect the beauty and service life of the sink. At the same time, it can also filter food residues, keep the sink clean, and make the kitchen environment more hygienic and tidy.

2. Catering industry: In restaurants, hotels, canteens and other catering places, the kitchen sink is used very frequently, and a large number of tableware and ingredients often need to be washed. Using Stainless Steel Sink Protector Rack can play a good role in protecting the sink, reduce the risk of sink damage caused by frequent use, and reduce the cost of repairing and replacing the sink. In addition, its efficient filtering function can prevent food residues from entering the drainage pipe, avoid pipe blockage, ensure the smooth flow of the kitchen drainage system, and ensure the normal operation of the catering place.

3. Food processing enterprises: For food processing enterprises, a large amount of food residues and wastewater will be generated during the production process. As an important drainage channel, the sink needs to be properly protected. Stainless Steel Sink Protector Rack can be installed in the sink of the production workshop to effectively filter out food residues and prevent them from entering the drainage system, causing pipe blockage and pollution. At the same time, its sturdy and durable material can withstand various pressures and impacts generated during food processing, ensure the normal service life of the sink, and protect the production efficiency and product quality of food processing enterprises.

4. Public kitchen facilities: Stainless Steel Sink Protector Rack also plays an important role in public kitchen facilities such as school cafeterias, hospital food distribution rooms, and kitchens in community activity centers. It can protect public sinks from damage, reduce maintenance costs and resource waste, and provide long-term and stable use value for public institutions. Its filtering function can also keep the sink clean and hygienic, providing the public with a healthy and safe eating environment.

5. Water catering and entertainment venues: In water catering and entertainment venues such as cruise ships and yachts, due to limited space and the special use environment of the sink, higher requirements are placed on the protection and cleaning of the sink. Stainless Steel Sink Protector Rack can be customized and installed according to the actual size of the sink to adapt to different space layouts. During use, it can prevent the sink from being scratched by tableware, food ingredients and other items on the ship, while filtering out residues, ensuring the smooth flow of the drainage system and ensuring the normal operation and environmental hygiene of water catering and entertainment venues.

Maintenance:

1. Regular cleaning: Stainless Steel Sink Protector Rack will accumulate a certain amount of dirt and food residue during use. It is recommended to perform a comprehensive cleaning at least once a week. When cleaning, you can first gently scrub the surface with a soft brush to remove stains attached to the grid and legs, and then rinse with clean water to ensure that there is no residue. For stubborn stains, you can use an appropriate amount of neutral detergent to wipe, and avoid using corrosive detergents such as strong acids and alkalis to avoid damaging the electrolytic polishing layer on the surface. After cleaning, place the protection rack in a ventilated place to dry naturally, and avoid soaking in water for a long time to prevent rust.

2. Prevent hard object impact: Although the Stainless Steel Sink Protector Rack has high strength, it is still necessary to avoid severe impact from hard objects during use. When placing heavy or sharp objects, they should be handled with care and placed in the middle of the protection rack as much as possible to reduce the impact on the edges and legs. If the protection rack is found to be deformed or the legs are damaged, it should be repaired or replaced in time to ensure its normal use function and protection effect on the sink.

3. Check the status of the feet regularly: The feet are the key part of the Stainless Steel Sink Protector Rack that contacts the sink, and their status directly affects the stability and service life of the rack. Regularly check the wear and aging of the feet and the fit with the sink. If the feet are found to be worn, loose or deformed, they should be replaced with new feet in time. At the same time, check whether the anti-slip performance of the feet is good. If necessary, add anti-slip pads to the bottom of the feet to enhance their grip and prevent the rack from sliding during use, thereby avoiding damage to the sink and items.

4. Avoid chemical corrosion: In the kitchen environment, you may come into contact with various chemical substances, such as detergents, disinfectants, acid and alkali solutions, etc. If these substances come into contact with the Stainless Steel Sink Protector Rack for a long time, they may corrode its surface and material. Therefore, when using chemical substances, try to avoid direct contact with the rack. If they are accidentally splashed on the rack, rinse them with clean water immediately. At the same time, when storing chemical substances such as cleaning supplies, keep them away from the rack to ensure that they are in a safe environment.

5. Regularly perform rust removal: Although the Stainless Steel Sink Protector Rack is made of stainless steel, it may still develop a small amount of rust during long-term use due to impurities in the water, humid environment and other factors. To ensure its beauty and service life, you can use a professional stainless steel rust remover to remove rust regularly. When removing rust, you should operate correctly according to the requirements of the instructions. First, apply the rust remover to the rusted area, wait for it to fully react, wipe it clean with a soft cloth, then rinse it with clean water and dry it. After rust removal, you can apply a layer of food-grade anti-rust oil to enhance its anti-rust ability, but you should pay attention to the amount of anti-rust oil applied to avoid excessive residue affecting use.

Jiangmen Pengjiang District Zhengyong Hardware Co., Ltd.

Jiangmen Pengjiang District Zhengyong Hardware Co., Ltd. was founded in 2017. Since its establishment, the company has obtained CUPC certification and is based on the ISO90001:2015 quality management system. The company specializes in the production of kitchen and bathroom supporting shelves, sink racks, drain baskets and other hardware products. Adhering to the business philosophy of "quality first and marketing first" and management as the soul, we have established internal R&D, production and other departments. We are a professional kitchen and bathroom hardware accessories manufacturing company integrating R&D, design, production and sales. The products have novel styles and stable quality, and can be customized according to customer needs.

On the basis of absorbing advanced domestic and foreign technologies and years of experience in kitchen and bathroom hardware supporting products, the company's product production stability and reliability have been recognized and trusted by cooperative customers. While creating high-quality kitchen and bathroom hardware products and improving the quality of life, the company insists on using corporate culture to enhance the core competitiveness of the company, so that the company can establish a correct and good social image in its development. Maintain long-term cooperative relationships with domestic first-tier brand companies.

"Professional", "reliable" and "accurate" are our company's production spirit and service belief. It is precisely because of this that our company's products are sold at home and abroad and in major and medium-sized cities in China, and are well received and praised by users. We strictly ensure that product quality passes the test. Every piece of fine quality. As the company continues to develop, Zhengyong will adhere to the business philosophy of pioneering innovation and advancing with the times, producing in China and facing the world.