Roll Up Drying Dish Rack

Roll Up Drying Dish Rack Features:

1. High Load-Bearing Strength

This Roll Up Drying Dish Rack uses solid stainless steel rods. A single rod can withstand an average load of 8 to 10 kg, and the entire rack, when unfolded, can evenly support over 40 kg. This high-strength support ensures stability when carrying multiple bowls, glasses, or pots of water, preventing bending or slippage.

2. Excellent Temperature Resistance

The stainless steel rods remain structurally stable at temperatures between 200 and 300 degrees Celsius, without softening or deformation. The anti-slip strips at both ends have passed high-temperature resistance tests, remaining intact and crack-free after 30 minutes at 120 degrees Celsius.

3. Strong Corrosion Resistance

This product is made of food-grade stainless steel. The polished surface has a roughness of less than 0.8 micrometers, effectively reducing stain adhesion. After a 48-hour salt spray test, no rust spots formed, demonstrating its stability in the long-term humid and hot environment of a kitchen. 

4. Excellent Anti-slip Stability

The ends are covered with elastic rubber strips, with a coefficient of friction of approximately 0.7, ensuring stable contact with the sink edge when unfolded. It remains non-slip even at a 15-degree angle, ensuring dishes and containers do not shift during draining.

5. Reasonable Bar Arrangement

The average spacing between the bars is 10 to 12 mm. Based on load and drip efficiency evaluations, this spacing is sufficient to support small items while maintaining good drainage speed. The spacing design also ensures that water droplets quickly fall into the sink, preventing water accumulation on the countertop.

Roll Up Drying Dish Rack Application:

1. Draining tableware in the kitchen

In the kitchen environment, the Roll Up Stainless Steel Drying Rack is an ideal choice for draining tableware. After washing dishes, cups, plates and other tableware, place them neatly in the drain rack. Water droplets will flow into the sink along the gap between the stainless steel rods, effectively avoiding water accumulation at the bottom of the tableware. According to actual use tests, using the drain rack to drain tableware can increase the drying speed by 40% and reduce 60% of water stains compared to directly placing them in the sink. This not only improves the drying efficiency of tableware, but also reduces the risk of bacterial growth, providing protection for family food hygiene.

2. Optimizing space in the kitchen

The foldable design of the drain rack provides a new solution for the utilization of space in the kitchen. It can be easily unfolded or folded, and can be stored in the kitchen cabinet or drawer when not in use to save space. For small kitchens, this space optimization design is particularly important. According to the space utilization test, the space utilization rate of the kitchen using the foldable drain rack is 35% higher than that of the traditional fixed drain rack, creating conditions for a neat and orderly environment in the kitchen.

3. Commercial sink area

In the sink area of commercial kitchens, drain racks are widely used to efficiently drain large quantities of tableware and kitchenware. For example, in the kitchens of restaurants, hotels or canteens, a large number of dishes, plates and cooking tools need to be washed and drained before they can be used again. The large size and high-strength design of the Roll Up Stainless Steel Drying Rack can meet the high-intensity use needs of commercial kitchens. In actual applications, commercial kitchens use drain racks to drain tableware, which improves work efficiency by 30%, while reducing the damage rate of tableware during the draining process and reducing operating costs.

4. Industrial food processing pretreatment area

In the pretreatment area of industrial food processing, drain racks can be used to wash and drain various food ingredients. For example, in canned food processing plants, vegetable preservation companies or meat processing workshops, food ingredients need to be quickly drained after washing for subsequent processing. The food-grade material and hygienic design of the Roll Up Stainless Steel Drying Rack meet food safety standards and can ensure that food is not contaminated during the draining process. According to industrial application tests, the use of drain racks for draining food raw materials can increase the draining efficiency by 50% compared with traditional methods, and can effectively reduce residual water and improve the quality and safety of food processing.

5. Laboratory ware cleaning

In laboratory environments, drain racks can be used to clean and drain various laboratory utensils. For example, in chemical laboratories, biological laboratories or food testing laboratories, beakers, test tubes, culture dishes and other utensils need to be thoroughly drained after cleaning to ensure the accuracy of the experiment. The stainless steel material of the Roll Up Stainless Steel Drying Rack has good chemical stability and corrosion resistance, and can resist the erosion of common chemical reagents and disinfectants in laboratories. In actual applications, the laboratory uses drain racks to drain utensils, and the drying efficiency is increased by 45%. At the same time, cross-contamination of utensils during the draining process is avoided, ensuring the reliability of experimental data.

6. Hotel restaurant kitchens

In the kitchens of hotel restaurants, drain racks are widely used to handle large quantities of tableware and glassware. Its efficient drainage performance and durability can meet the fast-paced work needs of hotel restaurants. According to industry application data, after using the drain rack, the tableware preparation efficiency of the hotel restaurant has increased by 35%, while reducing accidental drops and damage caused by incomplete draining of tableware, reducing operating costs. In addition, the modern design of the drain rack complements the kitchen decoration style of the hotel restaurant and enhances the overall visual effect.

Roll Up Drying Dish Rack Maintenance:

1. Daily Kitchen Draining

The Roll Up Drying Dish Rack is suitable for draining bowls, plates, cups, and tableware in a home kitchen. Based on actual household usage data, the average wetness of washed utensils is 5 to 30 ml. The rack allows water to drain quickly into the sink, reducing water accumulation on the countertop and improving cleaning efficiency.

2. Fruit and Vegetable Washing and Placement

After washing fruits and vegetables, users can place them on the rack to drain naturally. Vegetables typically have a surface water content of about 2 to 5% of their total weight. Using a rack allows excess water to drain quickly, shortening processing time and reducing the probability of secondary contamination of the cutting board.

3. Thawing Food

Frozen foods produce an average of 10 to 50 ml of thawing liquid during the thawing process. Placing them on the rack prevents liquid buildup, keeps the bottoms of the food dry, reduces sink odors, and helps maintain kitchen hygiene.

4. Temporary Storage Platform

During cooking, the Roll Up Drying Dish Rack can serve as a temporary work platform above the sink, such as for placing a cutting board or a small amount of food. Due to its stable support structure, the rack increases usable space in the sink area, improving countertop efficiency by approximately 20%.

5. Cooling Area After Drying

Suitable for cooling dishes that have just been removed from a dryer or sterilizer. Hot dishes are generally in the 60-90 degree Celsius range; placing them on the rack ensures air circulation, shortens the cooling cycle, and prevents direct contact with the countertop from damage.

Roll Up Drying Dish Rack FAQ:

Q: Is this Roll Up Drying Dish Rack suitable for all types of sinks?

A: It can be used with most standard single and double sinks, but you need to ensure that the sink's inner diameter is wider than the rack's length. It is recommended to measure the shortest side of your sink before selecting the appropriate size to ensure stable support.

Q: Will placing heavy objects on it for extended periods cause the stainless steel rod to bend?

A: It will not bend within its rated load capacity. The product has passed overload testing and shows no significant deformation even when continuously bearing a load of over 40 kg. Prolonged overload may affect its lifespan; it is recommended to use it within its rated range.

Q: Will the anti-slip strips loosen in humid environments?

A: No. The strips are mechanically fitted to the rod and have passed tensile testing, with a single-sided tensile strength exceeding 20 kg. Even in environments with 80% humidity for extended periods, they will not detach.

Q: Can it be used to place hot pots?

A: Yes. Both the stainless steel rod and the rubber strip possess high temperature resistance. The steel rod can withstand temperatures up to 300 degrees Celsius, while the rubber strip remains stable at 120 degrees Celsius, making it suitable for short-term placement of hot pots or high-temperature utensils.

Q: How to clean and maintain the drying rack?

A: It can be washed directly with a neutral detergent and allowed to air dry. The polished surface is less prone to dirt buildup; it is recommended to thoroughly clean it once a week to maintain hygiene and shine. Avoid using strong acid or alkaline cleaning products to ensure the material's lifespan.

Jiangmen Pengjiang District Zhengyong Hardware Co., Ltd.

Jiangmen Pengjiang District Zhengyong Hardware Co., Ltd. was founded in 2017. Since its establishment, the company has obtained CUPC certification and is based on the ISO90001:2015 quality management system. The company specializes in the production of kitchen and bathroom supporting shelves, sink racks, drain baskets and other hardware products. Adhering to the business philosophy of "quality first and marketing first" and management as the soul, we have established internal R&D, production and other departments. We are a professional kitchen and bathroom hardware accessories manufacturing company integrating R&D, design, production and sales. The products have novel styles and stable quality, and can be customized according to customer needs.

On the basis of absorbing advanced domestic and foreign technologies and years of experience in kitchen and bathroom hardware supporting products, the company's product production stability and reliability have been recognized and trusted by cooperative customers. While creating high-quality kitchen and bathroom hardware products and improving the quality of life, the company insists on using corporate culture to enhance the core competitiveness of the company, so that the company can establish a correct and good social image in its development. Maintain long-term cooperative relationships with domestic first-tier brand companies.

"Professional", "reliable" and "accurate" are our company's production spirit and service belief. It is precisely because of this that our company's products are sold at home and abroad and in major and medium-sized cities in China, and are well received and praised by users. We strictly ensure that product quality passes the test. Every piece of fine quality. As the company continues to develop, Zhengyong will adhere to the business philosophy of pioneering innovation and advancing with the times, producing in China and facing the world.